How to Treat Chemical Burns and When to Seek Professional Care (2024)

Chemical burns—otherwise known as caustic burns—occur when the skin comes into contact with an acid, base, alkali, detergent, or solvent, or the fumes produced by these corrosive materials. They most commonly affect the eyes, face, arms, and legs, but can cause serious damage to the mouth and throat if a corrosive material is ingested.

Fortunately, most chemical burns don’t do major damage to the skin. In fact, many are caused by common household or workplace materials and can be treated in outpatient settings—only about 5 percent of patients seeking emergency medical care for a chemical burn are admitted to the hospital. Highly caustic materials, however, can hurt deep layers of tissue, and the damage isn’t always immediately apparent.

Because the materials that cause chemical burns are so prevalent in homes, schools, and workplaces, it’s important to know what to do if you, a loved one, or a coworker come into contact with caustic materials.

How to Treat Chemical Burns and When to Seek Professional Care (1)

Symptoms of Chemical Burns

The symptoms of a chemical burn depend on a few basic but important factors:

  1. What substance caused the chemical burn
  2. Where the substance came into contact with living tissue
  3. How long the tissue was exposed to the corrosive substance
  4. Whether the substance was inhaled or ingested

Household bleach coming into contact with your skin, for example, will have a much different effect than bleach coming into contact with your eyes.

Although symptoms can vary widely, common signs and symptoms of a chemical burn include:

  • Pain, redness, irritation, burning, or numbness at the site of contact
  • The development of blisters or dead, blackened skin at the site of contact
  • Blurry vision or total loss of vision if the materials came into contact with the eyes
  • Coughing, wheezing, and shortness of breath if the substance was inhaled or ingested

In very severe chemical burns or if a corrosive substance was swallowed, you may experience symptoms like:

  • Weakness, dizziness, or fainting
  • Headache
  • Muscle spasms or seizures
  • Low blood pressure, irregular heartbeat, or even cardiac arrest

If you, a loved one, or a coworker comes into contact with a corrosive substance, seek medical care immediately. Even if the exposure seems minor—if a household cleaner splashes on your arms, for example—it’s a good idea to call your healthcare provider or Poison Control Center to determine whether emergency treatment is needed.

If the caustic substance is ingested or if the chemical burn is very deep, more than 3 inches in diameter, or affects the eyes, face, groin, buttocks, or a joint, seek emergency medical care.

Causes

Chemical burns are most commonly caused by exposure to acids or bases in the home, workplace, or at school—they can occur in any place where caustic and corrosive materials are handled. Chemical burns can affect anyone, but people who work in manufacturing facilities, children, and older adults are at the highest risk of injury.

Some common products that can cause chemical burns include:

  • Everyday household cleaners like bleach, ammonia, and drain or toilet cleaners
  • Skin, hair, and nail care products, and teeth whitening kits
  • Car batteries
  • Pool chlorine and pool cleaning systems

If possible, read the warnings and medical information on the labels of corrosive products before handling. In many cases, consumer education and proper use can prevent a serious medical emergency.

Although most chemical burns are caused by the accidental misuse of a corrosive substance, they can also be used in assaults. Worldwide, attacks with caustic materials are more likely to occur against women.

Diagnosis

Like symptoms of a chemical burn, diagnoses can vary widely.Your healthcare provider will conduct a physical exam to assess the immediate tissue damage caused by the chemical burn, and ask a series of questions to assess any potential damage. Be sure to tell your healthcare provider about the substance that caused the chemical burn, how long it was in contact with the skin, and the affected body parts.

If you have a severe chemical burn, your healthcare provider may conduct a blood test to determine whether or not hospitalization is required.

After a physical exam and interview, the chemical burn will be categorized as:

  • A First-Degree or Superficial Burn: These types of burns affect only the epidermis or the outer layer of the skin. Minor discoloration of the skin is a common symptom of a first-degree burn.
  • A Second-Degree or Partial Thickness Burn: Affecting the epidermis and dermis (second) layers of the skin, these burns can be very red, inflamed, and painful, and can blister.
  • A Third-Degree or Full-Thickness Burn: The most severe, these burns cause extensive damage to the epidermis and dermis, as well as bones, tendons, muscles, and nerve endings.

Your healthcare provider will recommend treatment options based on the category of your chemical burns.

Treatment of Chemical and Acid Burns

Typically, chemical burns do not require hospitalization or specialized treatment.

For a minor chemical burn, basic first aid can alleviate pain and reduce tissue damage. When treating a minor chemical burn, be sure to:

  • Remove yourself, your loved one, or your coworker from the accident area.
  • Remove any contaminated clothing.
  • Flush the affected tissue with water for at least 20 minutes.
  • Remove any foreign objects from the affected area, especially the eyes.

After first aid has been administered, most people with chemical burns simply need to talk to their healthcare provider about follow-up care.

If you or the person affected by a chemical burn begins to experience dizziness, wheezing, difficulty breathing, or other severe symptoms, call 911 immediately.

Some treatments for serious chemical burns include:

  • IV fluids to regulate heart rate and blood pressure, or IV medications or antibiotics to treat pain or prevent infection
  • Antidotes to counteract the effects of the caustic substance
  • Professional cleaning and bandaging
  • Pain management through an IV or other pain medications
  • A tetanus booster to prevent bacterial infections

Chemical burns rarely result in death, but it’s important to take the steps necessary to avoid infection and protect and heal damaged tissues. If you’ve been treated for a chemical burn, be sure to arrange follow-up care with your healthcare provider within 24 hours of sustaining the injury.

Natural Burn Remedies and Ointments

A Word From Verywell

Chemical and acid burns can be painful, but the good news is that most can be treated with basic first aid and follow-up care. Whenever you’re handling corrosive or caustic substances, be sure to read any warning labels and use extra care to avoid contact with your skin, eyes, or mouth. Oftentimes, proper consumer education can prevent serious medical emergencies.

Frequently Asked Questions

  • How should you treat a bleach burn?

    You should treat a bleach burn like most other chemical burns - move to a safe area, remove any clothing and accessories covering the burn, and run cool water over it for 20 minutes. If the burn is mild, you can gently apply an aloe gel or cream to it and place a gauze pad over it. It is a good idea to contact a healthcare provider about the bleach burn even after home treatment; this is especially important if it is on the face, eyes, hands, genitals, scalp, across a joint, or if it was ingested.

  • Should a mild chemical burn be brought to the hospital?

    If a mild chemical burn received proper treatment and the substance that caused it has been identified, the burn may not need to be brought to the hospital. However, a healthcare provider should still be notified in case they wish to treat it themselves. Even if the burn appears minor, it can't hurt to get it checked out. If the chemical burn shows any signs of infection, like swelling, oozing pus, redness, or an onset of fever, it should be brought to your healthcare provider's attention.

  • How long does a chemical burn take to heal?

    How long a chemical burn takes to heal depends on its severity and the substance that caused it.

    • First-degree burn: Generally heals within three to six days. After one or two days, the skin can lightly peel.
    • Second-degree burn: Healing can take over three weeks. This severity of burn affects the skin's top layer and a portion of the layer beneath it.
    • Third-degree and fourth-degree burn: Multiple weeks or months may be needed to heal this burn. Severe burns can require a skin graft, a procedure in which healthy skin is attached to the damaged area to help with skin repair.

2 Sources

Verywell Health uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.

  1. Nemours KidsHealth. Burns.

  2. MedlinePlus. Minor Burns - Aftercare.

Additional Reading

How to Treat Chemical Burns and When to Seek Professional Care (2)

By Christina Donnelly
Christina Donnelly is a freelance writer and editor who has extensively covered health and science content. She currently works at Anthem Health as a content lead.

See Our Editorial Process

Meet Our Medical Expert Board

Was this page helpful?

Thanks for your feedback!

What is your feedback?

How to Treat Chemical Burns and When to Seek Professional Care (2024)

FAQs

How to Treat Chemical Burns and When to Seek Professional Care? ›

Always seek emergency care for any burn that is larger than 3 inches in diameter or is very deep. Also seek emergency care for any chemical burns involving the face, eyes, groin, hands, feet, or buttocks or if it is over a joint.

When should you go to the doctor for a chemical burn? ›

Always seek emergency care for any burn that is larger than 3 inches in diameter or is very deep. Also seek emergency care for any chemical burns involving the face, eyes, groin, hands, feet, or buttocks or if it is over a joint.

What is the protocol for chemical burns? ›

Remove the patient from the area of exposure. Remove all clothing and jewelry. Brush any dry chemicals off the patient; any suitable instrument may be used (eg, dry brush, towel). Irrigate exposed tissue with copious amounts of water.

What are the 3 steps for treating a chemical burn? ›

Immediate treatment for chemical burns in hospital includes: continuing to wash off the corrosive substance with water until it's completely removed. cleaning the burn and covering it with an appropriate dressing. pain relief.

What is the important initial care when chemical burn is suspected? ›

Rinse and Clear Burn Area

As you flush the burn (not before), remove jewelry or articles of clothing with chemicals on them, unless they're stuck to the person's body. After flushing the burn, follow instructions on the label of the chemical product, if available. Don't try to neutralize the burn with acid or alkali.

How do you know if a chemical burn is bad? ›

Minor chemical burns will most often heal without further treatment. However, if there is a second or third degree burn or if there is an overall body reaction, get medical help right away. In severe cases, don't leave the person alone and watch carefully for reactions affecting the entire body.

What can a doctor do for a chemical burn? ›

If the chemical is a poison, you might receive an antidote to counteract it. If you have problems breathing, the doctor might add a breathing tube. Skin grafting might be an option if your burn is severe. With skin grafting, the doctor will remove healthy tissue from somewhere else to replace the damaged skin.

Should you cover a chemical burn or let it breathe? ›

Cover your burn with a clean bandage or wound dressing like non-stick gauze. Avoid touching your burn or placing clothing on your skin that can cause friction or rub against your wound. Take over-the-counter pain relievers (acetaminophen or ibuprofen) as recommended by your provider if you experience pain.

Should I go to the ER for a chemical burn? ›

Usually, you are aware of such a burn and its cause. But sometimes you may not immediately recognize a burn caused by a milder chemical. As with some sunburns, the damage may develop hours after the exposure. Major chemical burns need emergency medical help.

Do you go to the hospital for chemical burns? ›

Chemicals can irritate and burn the skin causing damage that can sometimes be fatal. These burns can occur in industry or in the home from common household products. They can also occur from malicious acid attacks. Anyone with a chemical burn will need emergency help as soon as possible.

What is the main priority for treatment in a burn? ›

The highest priority (after airway, breathing, and intravenous access) in the setting of combined burn/trauma is the assessment and treatment of immediately life-threatening injuries, whether penetrating or blunt, then the management of the burn [46].

What is the best ointment for chemical burns? ›

You may put a thin layer of ointment, such as petroleum jelly or aloe vera, on the burn. The ointment does not need to have antibiotics in it. Some antibiotic ointments can cause an allergic reaction. Do not use cream, lotion, oil, cortisone, butter, or egg white.

What is the first intervention for a burn patient? ›

cool the burn with cool or lukewarm running water for 20 minutes – don't use ice, iced water, or any creams or greasy substances such as butter. remove any clothing or jewellery that's near the burnt area of skin, including babies' nappies - but don't move anything that's stuck to the skin.

What is the most important clinical concern in serious burns? ›

Infection is also a major concern. Burns damage the skin's protective barrier, meaning bacteria and other foreign invaders can sneak in. Burns also weaken the immune system, so the body is less able to fight off threats.

What does a serious chemical burn look like? ›

Symptoms of Chemical Burns

The area is red, swollen, and painful but does not develop blisters. Sometimes, burns are deeper, with blisters and severe pain. Rarely, a strong acid or alkali will cause a full-thickness (third-degree) burn, that damages the skin all the way through.

How long should a chemical burn hurt? ›

Chemical burns, even minor ones, can be very painful. A minor burn may heal within a few days. But a more serious burn may take weeks or even months to heal completely. When the skin is damaged by a burn, it may become infected.

Do chemical burns get worse before they get better? ›

Chemicals may also be found in some workplaces, such as wet or dry cement or battery acid. Signs and symptoms may not develop for several days. A burn may be worse than it appears at first. It may also get worse over the first few days.

Top Articles
Latest Posts
Article information

Author: Margart Wisoky

Last Updated:

Views: 5740

Rating: 4.8 / 5 (58 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Margart Wisoky

Birthday: 1993-05-13

Address: 2113 Abernathy Knoll, New Tamerafurt, CT 66893-2169

Phone: +25815234346805

Job: Central Developer

Hobby: Machining, Pottery, Rafting, Cosplaying, Jogging, Taekwondo, Scouting

Introduction: My name is Margart Wisoky, I am a gorgeous, shiny, successful, beautiful, adventurous, excited, pleasant person who loves writing and wants to share my knowledge and understanding with you.